The Mcleod Microstill MMS 2000
The McLeod Microstill MMS - 2000 is compatible with both CSFA and FIA SYSTEMS.
The original concept of the microstill was developed by Stan McLeod, formerly of the CSIRO, Division of Soils in Adelaide, Australia.
Dr McLeod is still involved with this project and is available as a consultant. He can be contacted by e-mail:
stanart@picknowl.com.au
Features
- Design for in-line distillation with Continuous Flow Analysers
- Heater Block Assembly measures 110mm (L) x 60mm (W) x 65mm (H)
- Overall height with Stainless Steel Distillation Unit is 170mm
- Ceramic Insulation retains heat within the Heater Block
- Exposed parts of still and block can be touched by hand without burning
- Safety Cut-out when exceed set Cut-out limit
- Alcohol
- Ammonia
- Nitrate
- Nitrite
- Free Cyanide
- Total Cyanide
- Phenol
- Sulphide
- Volatile Acidity
Specifications
| |
| Heating Range |
: Ambient to 170° (Factory Set) |
| Accuracy |
: <0.5° |
| Readability |
: 1°C |
| Safety Cut-out |
: Variable (Factory Set) 160°C |
| Power Requirement |
: 240VAC - 50Hz or 115VAC - 60Hz (Nominate) |
| Dimensions |
: 200mm (H) x 180mm (W) x 70mm (H) |
Incorporates Fuzzy Logic Control with Auto Tune Facility |
| |
|
|
| |
| Internal |
: Aluminium Block with twin bar heaters, PT 100 sensor and safety cut-out |
|
: Ceramic Insulation |
| External |
: Teflon Coated |
|
: PTFE Drip Nozzle |
|
: 2 metre line cord to Controller Unit |
| Dimensions |
: 110mm (L) x 60mm (W) x 65mm (H) |
| |
|
|
| |
| Material |
: 316 Stainless Steel |
| Inlet |
: 2 (Air or gas) and (Sampler & Dist. Reagent) |
| Outlets |
: 2 (Sample + Steam) and (Waste) |
Inner sample tube adjustable to maintain critical retention volume
No welds - completely disassembles for ease of cleaning
Comes complete with spare distillation tube and PTFE 'O' Ring Kit
|
| |
|
|
| |
|
20 to 30 samples per hour - dependent upon analyses |
Contacts
| |
|
|
| |
| BAMRICO |
Phone: (61 8) 6402 2775 ¤ Fax: (61 8) 6402 2776
Email: info@bamrico.com.au
|
| |
|
|
| |
| Applied Electronics |
Phone: (61 8) 9240 1229 ¤ Fax: (61 8) 9240 1134 |
| |
|
|
| |
| CMJ Precision Engineering |
Phone: (61 8) 9344 3829 ¤ Fax: (61 8) 9344 3839 |
| |
|
|
The Chemistry Centre of Western Australia (Natural Resources Division)
for their assistance and constructive thoughts which has led to this design.
|
