The Mcleod Microstill MMS 2000 PDF Print E-mail
Written by Bamrico Team   

The McLeod Microstill MMS - 2000 is compatible with both CSFA and FIA SYSTEMS. The original concept of the microstill was developed by Stan McLeod, formerly of the CSIRO, Division of Soils in Adelaide, Australia. Dr McLeod is still involved with this project and is available as a consultant. He can be contacted by e-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Features

Compact Design

  • Design for in-line distillation with Continuous Flow Analysers
  • Heater Block Assembly measures 110mm (L) x 60mm (W) x 65mm (H)
  • Overall height with Stainless Steel Distillation Unit is 170mm

Safety

  • Ceramic Insulation retains heat within the Heater Block
  • Exposed parts of still and block can be touched by hand without burning
  • Safety Cut-out when exceed set Cut-out limit.

Proven Analyses

  • Alcohol
  • Ammonia
  • Nitrate
  • Nitrite
  • Free Cyanide
  • Total Cyanide
  • Phenol
  • Sulphide
  • Volatile Acidity
  • Specifications

Controller Unit 

 Heating Range: Ambient to 170° (Factory Set)
 Accuracy: <0.5°
 Readability: 1°C
 Safety Cut-out: Variable (Factory Set) 160°C
 Power Requirement: 240VAC - 50Hz or 115VAC - 60Hz (Nominate)
 Dimensions: 200mm (H) x 180mm (W) x 70mm (H)

Incorporates Fuzzy Logic Control with Auto Tune Facility

Heater Block

Internal                    : Aluminium Block with twin bar heaters, PT 100 sensor and safety cut-out
: Ceramic Insulation  
External : Teflon Coated
: PTFE Drip Nozzle
: 2 metre line cord to Controller Unit  
Dimensions: 110mm (L) x 60mm (W) x 65mm (H)

Distillation Unit

 Material : 316 Stainless Steel
 Inlet  : 2 (Air or gas) and (Sampler & Dist. Reagent)
 Outlets  : 2 (Sample + Steam) and (Waste)

Inner sample tube adjustable to maintain critical retention volume
No welds - completely disassembles for ease of cleaning
Comes complete with spare distillation tube and PTFE 'O' Ring Kit

Throughput 

20 to 30 samples per hour - dependent upon analyses

Contacts

Sales & Service 
 
BAMRICO Phone: (61 8) 6402 2775 ¤ Fax: (61 8) 6402 2776
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it   

Manufacturer
 
Applied Electronics Phone: (61 8) 9240 1229 ¤ Fax: (61 8) 9240 1134 

S/S Engineering 
 
CMJ Precision Engineering Phone: (61 8) 9344 3829 ¤ Fax: (61 8) 9344 3839 

Acknowledgement

The Chemistry Centre of Western Australia (Natural Resources Division)
for their assistance and constructive thoughts which has led to this design.